Automatic Tape Dispenser - AT-3500 tape dispenser

X.L.T. International Electronics Co., LTD—AUTOTEK series automatic tape dispenser be born in 2003, which has 10 years history. At present is the largest automatic tape dispenser manufacturer, is also the most complete production automatic tape dispenser model of the manufacturers, which reached 60% share in the domestic automatic tape dispenser market sales.

Automatic Tape Dispenser - AT-3500 tape dispenser:

The packing information:
1 unit/box       Size:18*23*19cm

Products Features:
1. Cutting narrower tape has advantage; the narrowest can reach 3 mm.
2. Have infrared induction function and infrared sensor move freely.

Characteristic introduction:
1.Tape cutting length standard consistent.
2. Through the knob adjust the length of the tape and spacing.
3. Change blade very simple
4. Applicable scope: fiber tape
Technical parameters:
polyimide/ acetic acid

Automatic Tape Dispenser - AT-60 tape dispenser

X.L.T. International Electronics Co., LTD—AUTOTEK series automatic tape dispenser be born in 2003, which has 10 years history. At present is the largest automatic tape dispenser manufacturer, is also the most complete production automatic tape dispenser model of the manufacturers, which reached 60% share in the domestic automatic tape dispenser market sales.

Automatic Tape Dispenser - AT-60 tape dispenser:

Dimensioned Drawing:

The packing information:
1 unit/box       Size:18*23*19cm

Products Features:
1. Cut tape/ gummed paper/ protective film width from 6-60 mm
2. Can clamp two volumes tape at the same time/ and cut at the same time.
3. Memory function/ set the OK length/ shutdown then start the machine/ still keep the original data.
4. Circulation cutting function set six groups of different length cycle supply freely.
5. Thick and thin tape can be applicable cutting length accurately.
6. Safety performance is high/ A: design safety cover in the cutting blade place. B: when the machine was blocking/ warning device automatic work/ even if the tamper cleared/ the machine will not immediately work/ must press start button again to continue to work.
7. no roller design
8.Applicable scope: filaments tape/ strengthen tape/ acetate fiber tape/  glass fiber tape/ double-sided adhesive/ Normex/ etc

Automatic Tape Dispenser - AT-55 tape dispenser

Automatic Tape Dispenser - AT-55 tape dispenser:

Dimensioned Drawing:

The packing information:

1 unit/box       Packing Size:18*27*19cm   Net Weight:3KG     Gross Weight:3.5KG

4 units/CTN     Packing Size:40*27*39cm   Net Weight:12KG     Gross Weight:14KG

8 units/CTN     Packing Size:54*40*40cm   Net Weight:24KG     Gross Weight:28KG

Products Features:

1. The Min cutting length is 5mm. 

2. Apply for adhesive tape. 

3. Two rollers can be cut together. 

4. Memory function/ set the OK length/ shutdown then start the machine/ still keep the original data.

5. AUTO/MANUAL modes

6. "Length setting” memory

7. AUTO/MANUAL modes switch selection

8. Two rollers tape can be cut together. 

9. With tape sensor function: automatically lead out tape

10. Application: adhesive tape

Technical parameters:

Power:AC220V 50Hz  / AC110V 60Hz

Cut width:7mm-55mm

Cut length:5-999mm±1(mm)

Automatic Tape Dispenser - A-2000 tape dispenser

Automatic Tape Dispenser - A-2000 tape dispenser:

Dimensioned Drawing

The packing information:
1 unit/box       Packing Size:18*27*19cm   Net Weight:3.2KG    Gross Weight:3.8KG
4 units/CTN     Packing Size:40*27*39cm   Net Weight:13KG     Gross Weight:16KG
8 units/CTN     Packing Size:54*40*40cm   Net Weight:26KG     Gross Weight:32KG

Products Features:
1. The Min cutting length is 5mm.
2. Apply for adhesive tape and non-adhesive protect film.
3. Two rollers can be cut together.
4. Memory function set the OK length shutdown then start the machine still keep the original data.
5. With overlapping bracket can be overlap the gummed paper 2 or 3 layers then cutting.
6. With stripping bracket will be stripper the bottom of tape and metal paper then cutting.
7. Freely adjust length and digital display
8. Cutting  adhesive and non-adhesive tape
9. Manual/automatic modes
10. With tape sensor function: automatically lead out tape
11. Scope of application: adhesive and non-adhesive tape

Technical parameters:
Power:AC220V 50Hz  / AC110V 60Hz
Cut width:5mm-50mm
Cut length:5-999mm±1(mm)
More:Tape cutter after the tape apart from the bottom paper
Optional bracket
tape cutter after overlap
Bilevel bracket
Triple bracket
tape stripper bracket

Instruction of “C” series Semi-automatic Soldering Station

Many customers are interested in the semi-automatic soldering station.because this kind of machine can "lend you a hand".Think about A task that requires two hands to perform such as soldering usually needs additional tools for holding (e.g. a cable) or adding (e.g. solder) an object to a specific position.then How i wish who will lend me one or two hand!Now the SMTechnology Brand semi-automatic Soldering Station will just DO IT!

Technical Seminar on 2014

Our company trend the technical seminar in Guangzhou on 23 May 2014.Which it content the high efficiency and quality of the soldering robot. At present, the technology development of automatic soldering is a developing towards in high efficiency, and it is a automatic direction in the industry. Automatic soldering welding has the broad prospects of the application of new technology, vigorously promote application of new and advanced soldering process and soldering method, it is the responsibility of everyone.

Robotic Soldering

Robotic Soldering Benefits
The robot is developed for stable and premium soldering processes at the same or even less cycle times than manual soldering.

Robotic Soldering Products
XLT International Electronics Co.,Ltd offers a variety of innovative robots designed for precise high speed assembly applications.
The SMARTER Series Desktop robots are designed to minimize footprint and maximize efficiencies in assembly line operations. This design increases the efficiency of operators in order to reduce labour content. With the SMARTER Series Desktop robots, assembly line operators stay busy loading and unloading fixtures while the robot is performing precision assembling tasks.


Robotic Soldering Applications
Typical soldering processes are:
• Touch-up or resoldering of solder spot after soldering bath
• Soldering on the component side of PC board for jumper wires, connectors, switches and so on
• Making solder joints between PCB
• Through Hole Solder applications
• Making solder joints between pins and housing on the board
• Making solder joints between metal frame and PCB
• Soldering of odd shaped components with leads at SMD- PCB

On your specific requirements we design and integrate the entire soldering robot into your system.
Robotic Soldering is applied in many industries, such as  Automotive, IT & Multimedia, Electronics & Solar Cells, Aerospace,LED and Medical.

Solution of the ZCUT-2 gear are stucks

Customer in India: its very fine for 5 hours but after 5 hours gear are stucks(this parts is not completing full cycle,move and down is one cycle but its stuck in middle and not complete full cycle).pls find the attached video.why gears are stucks in new Automatic Tape Dispenser?

We reply: because the tape is a bit thick.this kind of cotton tape is not suitable for ZCUT-2.pls change another kind of tape to check it.

Customer in India :yes,cell tape is working fine!

Conclusion: the ZCUT-2 tape dispenser is not suitable for the 0.5mm thick cotton tape.

Solution: fray the cushion a slight thin.for 0.3mm will be ok.

New product Of 868 Screw Feeder/Screw conveyor machine

Main Products Features:
1. Adjust orbit randomly, suitable for screw diameter range 1.0 mm to 5.0 mm, it also suitable for M1.0-M5.0 screw.
2. Less breakdown, lower noise, fault alarm function.
3. with Motor transport the screws through the dial to the cross, and with the draw-type screwdriver or a Soldering Robot, used for stainless steel screws or with automatic machine.

CCTV invited Mr Liu Antang as the guest to attend the “influence dialogue”Programa on 10,May 2014.

Recently,the CCTV invited the General Manager Mr Liu Antang of XLT International Electronics Co,Ltd to attend “influence dialogue” Program, he has shared the experience of how to develop and how to make the first "automatic soldering robot" in China.

Dialogue gest Mr Liu Antang was born in 1967,the XLT International Electronics Co,Ltd was established in 2002.The first "automatic soldering robot" was developed in 2006,it is well thought of SMT Guangdong Electronics experts in 2008.

Screw Feeder - 802 screw feeder

X.L.T. International Electronics Co., LTD—AUTOTEK automatic screw feeder is the global first can be replaced with a different size of the above tracks, only needs to replace different tracks, a variety of screws sq ft can also use,　Comepared with others,the AUTOTEK screw feeder with track smooth, reduce the blocking screws tracks.

Screw Feeder - 802 screw feeder:

Dimensioned Drawing：

The Screw Feeder packing information:

4 units/CTN   Packing Size:52*44*30cm   Net Weight:12KG   Gross Weight:13KG

Products Features:

1. Imported orbit materials/ good toughness/ and smooth/ not block screw/ durable.

2. Patent design vibrator/ vibrator always vibration/ never stop.

3. Guide Tsui fluctuation adjusted by screw/ convenient and accurate/ adjust distance can be accurate to 0.01 mm.

4. Brush fluctuation adjusted by screw/ very convenient.

5. 801 - C type with screw counting function: set A single product Shared screw quantity/ cycling and counting ways to additive or decline. B lock screws total records/ can count a machine total records a period out of the screw.

6. Adjust orbit randomly/ suitable for screw diameter range 1.0 mm to 5.0 mm/ it also suitable for diameter 1.0 mm screw.

Solder Feeder - 376 solder feeder

X.L.T. International Electronics Co., LTD—AUTOTEK series automatic tape dispenser be born in 2003, which has 10 years history. At present is the largest automatic tape dispenser manufacturer, is also the most complete production automatic tape dispenser model of the manufacturers, which reached 60% share in the domestic automatic tape dispenser market sales.

Solder Feeder - 376 solder feeder:

Dimensioned Drawing:

The Solder Feeder packing information:

1 unit/box       Packing Size:17*18*7cm   Net Weight:0.8KG    Gross Weight:1KG

Products Features:

1.376 is 375 upgrade versions 

2.Point hole stiletto on the solder can maintain the rosin flux as the origional。

3. Eliminate splash engendered by the high temperature soldering/ but also guarantee the original

soldering flow of the lead-free solder/ with excellent soldering quality.

4. Point hole stiletto on the solder avoid the flux exposed/ convenient for second coiling after stiletto.

Technical parameters:

Output voltage: 110V/220V

Weight: about 590g

Mainframe power: DC24V 75mA 

solder feeder speed: 30mm/s

Outline Dimension:  76mm(W)×96mm(H)×50mm(D)

Solder Dia.  : 0.5/0.6/0.8/1.0/1.2/1.5/1.6mm

Soldering Station - 937 lead-free soldering station

From 2003,more than 10 kinds of soldering station have been produced by X.L.T. International Electronics Co., LTD.As a traditional manufacturer in China,we have our own D&R team.Committed to delivering innovation,X series,Q series, C series and traditional 936&937 models are provided to the market.

936&937 Soldering Station - 937 lead-free soldering station:

Dimensioned Drawing:

The lead free soldering station packing information:
1 unit/box      Packing Size:48*28*25cm   Net Weight:2.5KG    Gross Weight:3KG
4 units/CTN    Packing Size:52*44*30cm   Net Weight:12KG     Gross Weight:13KG

Products Features:
1. CPU control temperature/ temperature with digital display.
2. Insert card to adjust the temperature/ amend temperature: and lock the temperature by fetching the card/ very simple operation
3. Import heater components/ with an extending life.
4. Soldering tip grounding voltage is less than 2 mv/ grounding resistance is less than 2 Ω
5. Complete series of soldering tips/ well meet with different soldering needs
6. Exquisite handle more comfortable for use.

Technical parameters:
Model :937
Voltage: 220V/50Hz 110V/60Hz (need custom-made)  Power:  60W
Temp. range: 200-480℃
Temp. stability :  ±2 (no negative charges)
The potential between tips: under 2mV
The resistance between tips: under 2Ω
Solder tip model    900M/900E series

Semiautomatic Soldering Station - C10 soldering station

From 2003,more than 10 kinds of soldering station have been produced by X.L.T. International Electronics Co., LTD.As a traditional manufacturer in China,we have our own D&R team.Committed to delivering innovation,X series,Q series, C series and traditional 936&937 models are provided to the market.

Semiautomatic Soldering Station - C10 soldering station:

Dimensioned Drawing:

The packing information:

1 unit/box       Packing Size:48*28*25cm   Net Weight:6KG    Gross Weight:7KG

Products Features:

1. The new design concept

Upgrade version of send solder soldering stations/ send solder construct/ heating element and solder tip and solder tube installation are all new design concept.

Fixed the soldering tip on the machine/ it can feed solder to the head of soldering tip automatically (no need one hand with solder/ another hand hold solder handle./so this permit operator hold the solder equipment with two hands.

2. avoid Soldering explode function

C9 automatic feed soldering station punch hole on the solder can eliminate solder wire generated gas when melting/ reduce the soldering splash (different solder match with different solder tube);

3. flexible/ scientific working principle

Soldering tube and solder tip precision combined with an organic whole won't shift.

Can also separate install the controller and soldering tip/ send solder construct/ effective save operation space; 

feeding solder position can be rotating 360 °around solder tip/ rotate to soldering tip of arbitrary Angle;

Solder tip/ solder wire tube Angle/ height arbitrary adjustable/ suitable for the different height operators application.

4. Two ways of solder feeding

1. Auto solder feeding: open the switch/ fixed solder wire length/ cycle operation

2. Manual solder feeding: press the switch to feeder solder/ loose switch to stop solder feeding

Freely set solder feeding length (under AUTO model/ achieved by setting solder feeding time)

Freely set solder feeding speed/ quick or slow per requirement

Lead Free Soldering Station - X5 soldering station

From 2003,more than 10 kinds of soldering station have been produced by X.L.T. International Electronics Co., LTD.As a traditional manufacturer in China,we have our own D&R team.Committed to delivering innovation,X series,Q series, C series and traditional 936&937 models are provided to the market.

Lead Free Soldering Station - X5 soldering station：

Dimensioned Drawing：

The packing information:
1 unit/box       Packing Size: 30*35*20cm   Net Weight:4KG    Gross Weight:5.5KG

Products Features:

1. 160W power/ soldering tip more big/ heat enough/ soldering process temperature stable/ suitable for large soldering point and long distance slide soldering. 

2. LCD large screen display window/ beautiful/ have the interface prompt of temperature/ working interface/ operation.

3. Use the selection of exquisite material/ absolute good quality; ensure long service life/ durable/ the host use life up to 5 years.

4. Handle design compact/ soft feeling/ good high temperature isolation effect/ continuous working temperature is still not more than 40 degrees.

5. Induction dormancy function/ dormancy judgment accurate/ so can improve the heating device/ soldering iron tip etc. material life/ to reduce cost.

6. Password locks the temperature.

Welcom to The 16th China Hi-Tech Fair

Address：Shenzhen Convention and Exhibition Center
Time:November,16-21.2014
STAND No.:2F20

X.L.T company will attend the China High Tech Fair November,16-21.2014.It is a professional technology products exhibition.The soldering robot as one of the main products of our company on the exhibition.
Sincerely welcome the friends all over the world to come, and develop the further cooperation.

XLT Lead Free Soldering Station Products Introduction

From 2003,more than 10 kinds of soldering station have been produced by X.L.T. International Electronics Co., LTD.As a traditional manufacturer in China,we have our own D&R team.Committed to delivering innovation,X series,Q series, C series and traditional 936&937 models are provided to the market.

Lead Free Soldering Station - X5 soldering station

The packing information:

1 unit/box　Packing Size: 30*35*20cm   Net Weight:4KG    Gross Weight:5.5KG

Products Features:

1. 160W power/ soldering tip more big/ heat enough/ soldering process temperature stable/ suitable for large soldering point and long distance slide soldering.
2. LCD large screen display window/ beautiful/ have the interface prompt of temperature/ working interface/ operation.
3. Use the selection of exquisite material/ absolute good quality; ensure long service life/ durable/ the host use life up to 5 years.
4. Handle design compact/ soft feeling/ good high temperature isolation effect/ continuous working temperature is still not more than 40 degrees.
5. Induction dormancy function/ dormancy judgment accurate/ so can improve the heating device/ soldering iron tip etc. material life/ to reduce cost.
6. Password locks the temperature.

Technical parameters:

Model Name		X1	X3	X5	HD80	Q3
Datas	Power Consumption	80W	130W	160W	80W	130W
	Input voltage	220V/110V	220V/110V	220V/110V	220V/110V	220V/110V
	Output voltage	DC24V	DC24V	DC24V	DC24V	DC24V
	Temp. range	150℃-450℃	150℃-450℃	150℃-450℃	150℃-450℃	150℃-450℃
	Temperature stability	±1℃	±1℃	±1℃	±1℃	±1℃
	Display	LCD	LCD	LCD	LED	LCD
	Soldering type	integrated	integrated	integrated	Separates	Separates
	Sleeping time set range	1-60min	1-60min	1-60min	1-60min	1-60min
	Manual temperature compensation	50°C-below the setted temp	50°C-below the setted temp	50°C-below the setted temp	50°C-below the setted temp	50°C-below the setted temp
	The potential between tips and grounding	between 2mv	between 2mv	between 2mv	between 2mv	between 2mv
	The resistance between tips and grounding	between 2mΩ	between 2mΩ	between 2mΩ	between 2mΩ	between 2mΩ
	Sleeping temperature range	-50°C-50°C	-50°C-50°C	-50°C-50°C	-50°C-50°C	-50°C-50°C
Delivery Packaging	1set/carton	30*35*20	30*35*20	30*35*20	30*35*20	30*35*20
	2sets/Carton	32*37*45	32*37*45	32*37*45	32*37*45	32*37*45
	8sets/carton	65*80*50	65*80*50	65*80*50	65*80*50	65*80*50
Unit Includes	Iron hold	1 PCS	1 PCS	1 PCS	1 PCS	1 PCS
	Handle wire	1 PCS	1 PCS	1 PCS	1 PCS	1 PCS
	solder iron	1 PCS	1 PCS	1 PCS	1 PCS	1 PCS
	Sleeping connect wire	1 PCS	1 PCS	1 PCS	1 PCS	1 PCS
	Temperature adjustment connector	1 PCS	1 PCS	1 PCS	1 PCS	1 PCS
Soldering Iron tips		X1 series	X3 series	X5 series	Q1 series	Q3 series
Version / System		English and Chinese to be choosen
Application		Applied to kinds of industrial soldering. such as PCB,USB electronic components and connect the wires to PCB etc.
All of the soldering station with one year warranty.  Pls choose the suitable soldering tips for different kind of soldering station. Specifications may be modified without prior notice to improve product quality.

X.L.T. International Automatic Tape Dispenser manufacturers

X.L.T. International Electronics Co., LTD—AUTOTEK series automatic tape dispenser be born in 2003, which has 10 years history. At present is the largest automatic tape dispenser manufacturer, is also the most complete production automatic tape dispenser model of the manufacturers, which reached 60% share in the domestic automatic tape dispenser market sales.

Automatic Tape Dispenser - ZCUT-2 tape dispenser:

The packing information:

1 unit/box       Packing Size:38*27*24cm   Net Weight:3.5KG    Gross Weight:5KG

4 units/CTN     Packing Size:54*45*38cm    Net Weight:14KG    Gross Weight:24KG

Products Features:

1. Cutting narrower tape has advantage; the narrowest can reach 3 mm.

2. Cutting belt length standard consistent.

3. Every start can cut many pieces; the Automatic Tape Dispenser can be used for many people.

4. Every start turning 180/ tape hanging around the rotary table/ take gummed paper is very convenient. 

Technical parameters:

Power：AC220V 50Hz / AC110V 60Hz 

Cutting width：3mm-22mm

Cutting length：11-58mm±1（mm)

Applicable tape core Dia：300mm

X.L.T. International Electronics Co., LTD.

X.L.T. International Electronics Co., LTD. was founded in 2002, who have been dedicated in desktopsoldering robot,lead-free soldering station,automatic soldering Equipment.with 13 year's development,automatic tape dispenser such as M-1000,ZCUT-2 and RT-5000.Automatic screw feeder such as 800,801,802 model are provided for the oversea market.

Factory is 4000 square meters, more than 180 employees, including 12% R&D personnel, 25% college and bachelor degree or above, 10% engineering staff personnel,58% management and technical staff of all.

We have developed 30 kinds of mature product and won 11 national patents, including one patent product. We have successful applied three brands for the products.

"SMTechnology" Brand intelligent soldering station with automatically feeding&breaking solder,also with temperature adjusting function.

“SMARTER” Brand desktop soldering robot , four /five axis together achieve accurate position of any solder point in 3D space.

"AUTOTEK" Brand tape dispenser fit for different kinds of industry tape including adhesive and non-adhesive.

Our company has persisted in the management idea "quality and service are more important than sales promotion."We are committed to our customers' needs, we use technology to optimize our products all the time.up to now,

We have more than 30 kinds of products to make more choice available.
We have more than 10 years experience to make products reliable. 
We have awarded national patents. Such as the "Chinese Private Enterprises Famous Brand" and are a "Chinese Major Corporate Member" of USCEA (US-China exchange Association). 

Company Culture: 
1) Sincerity with people 
2) Sincerity with business 
3) Sincerity with products 
4) Sincerity with quality 
5) Sincerity with service 

Company concept: Quality and service are more important than promotion.

XLT SMARTER Desktop soldering robot

XLT SMARTER’s universal desktop soldering robots with 4 axes have been taken advantages by the wide range of manufactures. It is adoptable with iron tip, laser as well as ultrasonic soldering technique. It is also suitable for any production styles, such as inline or cell. This model includes precision solder feeder and patented flux dispersal prevention tool, called Clean Cut Feeder, which dramatically reduces solder ball as well as dispersion.

Soldering Robot Product:
S3030-PBT-4-100

Products Features:
1. variety of programming model 
a.The manual input mode: direct input solder spot coordinates/then on key global correction/ which can realize off-line programming(applicable to three axis soldering robot better)
b.Teach input mode: through the operation teaching box/ move the corresponding axis/ it can guide welding head to reach 3D space to any solder joints position/ then store the need of coordinate value. In the operating process/ it can choose manual speed and micro speed as request.
c.Data replication mode: through the USB of teach box which can copy and exchange the date in different machines/and revise the whole data correction/ also can realize off-line programming and data sharing.
d.Array functions: choose array starting point/end point/ reference point/the last line coordinates of reference points and the last line coordinates/all of this points can proceed the array copy.
e.Correction function: set three correction point which can make up for fixture skewing/ rotation and replace welding head caused by the deviation/ can avoid the unnecessary to re-check point and programming operation
f.Synchronization parameters input function: in the position of the programming can be carried out at the same time/ the solder parameters of input/ modify/ each solder joints of information display complete and accurate. For solder parameter type more PCB board is particularly effective

2．It can be set the weight of fixtures / and according to the fixtures weight for motion control algorithm optimization;Welding tip has safety height setting function/which prevent the damage of welding parts.

3．It can be set three movement speed: automatic speed (the system automatically in the running time)/ manual speed (teach programming in the initial positioning)/ micro speed (teach programming in the accurate positioning).

4．It can record the production information (welding production/ solder spot quantity/ welding time/ total welding time)/ can choose single point/designated multipoint (provisions up starting point and end point)/single/cycle solder operation mode.

5． It can support point soldering and slide soldering at the same time/including point soldering parameter 88 groups/slide soldering parameter 28 groups/which can be meet various highly difficult technology demand of soldering operation and micro soldering.

6．Abundant menu information/clearly for variety of date

7． Practical document management function:For date documents/which is preserved in teaching box/ It can be show、copy、rename、delete 、preserved into U disk and read specify document from U disk.


8．It can through external I/O interface and achieve real-time control for soldering robot to peripheral equipment.